MOLY-NRG Gasoline Treatment with Z-16 Plus is a fuel treatment for gasoline engines which was developed to meet the needs created by performance and environmental concerns for vehicles with gasoline engines. The current trend toward higher performance, and the increasing demands to reduce vehicle emissions have placed new demands on gasoline performance, which in most cases, are nearly impossible to meet with gasoline alone. This is where MOLY-NRG Gasoline Treatment with Z-16 Plus can be of particular benefit to individuals as well as fleet operations.

Fuel system deposits have become a bigger and bigger problem as smaller high-performance engines and fuel injection both become more common. With close tolerances and clearances in modern fuel systems, even minor deposits can result in significant reductions in performance. As deposits develop in fuel injectors, spray patterns as well as fuel quantities are affected. Both rob the engine of power and can increase emissions. The condition gets even worse when deposit formation is inconsistent form injector to injector.

MOLY-NRG Gasoline Treatment with Z-16 Plus was developed to combat these problems by providing clean-up and keep-clean performance for both injectors and intake valves. The advanced detergent formula of MOLY-NRG Gasoline Treatment with Z-16 Plus has the power to return injectors to 95% of original flow in one tankful of fuel. It also has the ability to keep the injectors clean indefinitely. MOLY-NRG Gasoline Treatment with Z-16 Plus can also remove intake valve deposits by an average of 10% to 50%. In fact, MOLY-NRG Gasoline Treatment with Z-16 Plus meets the BMW Lifetime Specification for intake valve cleanliness.

MOLY-NRG Gasoline Treatment with Z-16 Plus is formulated to provide much more than just clean injectors. MOLY-NRG Gasoline Treatment with Z-16 Plus meets or exceeds OEM primary deposit control targets as well as the secondary targets of fuel stability, lubricity, and corrosion control. These secondary targets are important for fuel pump, pump filter, and injector durability.

MOLY-NRG Gasoline Treatment with Z-16 Plus is also formulated to avoid damage to the emission control systems, oil thickening, valve sticking, fuel filer plugging, and adverse effects on fuel system seals.

MOLY-NRG Gasoline Treatment with Z-16 Plus can also be used as a low-cost diagnostic tool prior to (or instead of) shop maintenance. For example, if the vehicle continues to hard start, rough idle, hesitate, surge, or have poor fuel economy after treatment, then mechanical repairs are clearly necessary. We believe that a high percentage of what are initially thought to be needed mechanical repairs can be eliminated by first using MOLY-NRG Gasoline Treatment with Z-16 Plus. There are currently over 50 million fuel injected cars past their warranty, and the benefits MOLY-NRG Gasoline Treatment with Z-16 Plus can provide to fuel injector-related maintenance for these cars is staggering.

MOLY-NRG Gasoline Treatment with Z-16 Plus provides:

• Increased Fuel Economy
• Reduced Maintenance
• Reduced Emissions
• Increased Power and Performance
• "One-Tank" Clean - up to 95% as new condition

PAGE URL: http://www.kentoilcompany.com/portfolio/KentOil/gas.shtml
COMMENTS, ETC: webmaster@kentoilcompany.com
LAST UPDATED: Wednesday, 14-Sep-2005 13:26:57 EDT